Winplus LM55970 Instructions D'utilisation Et D'entretien page 6

Ceiling flush mount:
Final installed illustration
2
2. Wear safety glasses before drilling
pilot holes. Drill two 2 mm diameter pilot
holes.
4
4. Clip mounting brackets onto the
lighting fixture.
6
1
1. Select a suitable mounting location,
and make sure the wooden surface is
suitable for supporting the lighting fixture.
Use the measuring template to mark the
hook locations on the mounting surface.
3
3. Screw the mounting bracket with the
wood screw provided. Repeat for the
second mounting bracket.
Note: For concrete or drywall, you may use
drywall screws along with plastic anchors
instead of wood screws.