Winplus LM55970 Instructions D'utilisation Et D'entretien page 5

2
2. Wear safety glasses before drilling
pilot holes.
4
4a. Determine desired hanging height,
slip wire hanging hook through the chain.
4b. Insert the hanging hook into the
openings of the mounting bracket.
Repeat for another mounting bracket.
4c. Connect the chain onto the screw
hook, and repeat for another chain and
hook.
4c
4a
4b
3
3. Screw in the screw hooks (not provided).
5
5. Clip mounting brackets onto the
lighting fixture.
The lighting fixture is intended to be
installed directly beneath a ceiling-
mounted receptacle. The excess power
cord should be kept out of the work
space, such as by securing it to one of the
supporting chains with a cable tie.
5