CONSTRUCTION MANUAL
Thank you for choosing a Kanuk® hot-air kiln. We wish you lots of fun trying out
your new Kanuk®. Please read this manual carefully before fi rst use. It contains
important notes and information on installation, operation, and safe use.
1. Construction manual
Please take into account that combustion installations may only be put
into service after a district master chimneysweeper has verifi ed functio-
nality and safety of the exhaust system (chimney) and the heating appli-
ance. This also applies to the case of changes.
1.1. General requirements
Please adhere to the respective prescriptions governed by public law
when installing your Kanuk® hot-air kiln, especially those set by the state
building code and the corresponding fi ring directives.
1.1.1 Construction manual / accessories
Ash catch plate
Kiln shell of the Kanuk® with hot plate
Step I
Push the hangers at the top and bottom
into the fi rst and last radiation tube. The
side panels will be clipped into the bot-
tom hangers.
Step II
Fix the side panels with the accom-
panying screws at the top hangers.
EHV GmbH • Entwicklung | Herstellung | Vertrieb • Hauptstraße 131 • 01744 Dippoldiswalde
16
Remove the ash catch plate from its
packaging and clip it into the bolt under-
neath the door from the top.