Ricoh D8600 Mode D'emploi page 11

1. Safety Information for this Machine
• Do not place the machine on an uneven, sloping or unstable surface (such as a trolley) where it
may fall and cause damage to itself or others.
• When assembling the stand, mounting the main unit on a wall, or installing the main unit, make
sure to contact your local dealer. Do not attempt to perform the installation by yourself.
• Do not install the machine in a confined space without proper ventilation and air circulation,
such as in a closed cabinet. Allow proper space around the machine for dissipating heat
inside. Do not block any openings and vents on the machine. Overheating may result in
hazards and electric shock.
• To prevent personal injuries, mounting the main unit or installing the stand is required before
use.
• Avoid placing the display in direct sun or where direct sun or spot lighting will shine onto the
LCD panel, as the heat may damage the panel and the external casing of the display, and the
bright light will make viewing the display more difficult than necessary.
• Do not obstruct the machine's air inlet or outlet. Doing so risks fire caused by overheated
internal components or resulting in damage to the product.
• Do not allow foreign objects to enter the machine from the air inlet or outlet.
• Be sure to disconnect the plug from the wall outlet and clean the prongs and the area around
the prongs at least once a year. Allowing dust to build up on the plug constitutes a fire hazard.
Safety notice for remote control
• Do not expose the remote control to water or moisture. Failure to do so could result in
malfunction.
Battery safety notice
• Always ensure that the batteries are inserted with the positive and negative terminals in the
correct direction as shown in the battery compartment.
8