Remote Control; Creating A Program - Rega SATURN MK3 Mode D'emploi

04
CD FUNCTIONS

REMOTE CONTROL

The Solaris remote control allows complete control over the Saturn
CD/DAC player. The top section of the remote is dedicated to
DAC functions. The button marked CD/DAC allows you to switch
between the two modes available. Once in DAC mode, you can
also select any of the filter options via the FILTER button and also
select which input is used.
As well as all usual CD control functions, you can also control the
use of MP3 or WMA CD's using the album up/down function. You
can skip through multiple tracks using the -10, +10 & >100 buttons
depending on how many tracks are on your disc. If an MP3 or
WMA disc is loaded, it will display MP3 or WMA. CD text function
operates for MP3 discs only. N.B A maximum of 999 tracks and 99
albums when playing MP3 or WMA CDs.
(Batteries included - 2 x AAA Alkaline)
RC CODE: Phillips RC5 system number 16 audio pre-amplifier.
OTHER REMOTE CD FUNCTONS
SHUFFLE - To play tracks in a random order, press the SHUFFLE
button once: RANDOM will be highlighted and the tracks will be
played in a sequence generated by the player. To cancel shuffle
play, press the SHUFFLE button again. Play will continue in the
disc's original sequence after the current track being played has
finished.
REPEAT - To repeat a disc, press REPEAT: 'REP ALL' will
momentarily appear and REPEAT will be displayed. To repeat a
track, press REPEAT twice: 'REP TRACK' will momentarily appear
and REPEAT 1 will be displayed.
To repeat an Album (MP3 & WMA format), press REPEAT three
times: 'REP ALBUM' will momentarily appear and REPEAT will
be displayed. Pressing the REPEAT button will cycle between the
various repeat functions.
REMAINING TRACK - You can check the remaining time of the
track you are listening to by pressing the 'Time' button. Press it
again to return to the normal counter.
Note: Please give the player enough time to process the
information each time a new or different function is selected.
DISPLAY OFF – Pressing the 'Display' button on the remote will
turn off the display. Press again to turn on.

CREATING A PROGRAM

The program function allows you to program up to 99 tracks from a
disc or album in any order you specify.
1. Press PROGRAM on the remote handset to create your new
program list: PROGRAM will appear on the display.
2. When the first program location appears you can enter the
required track number. Continue this until your required
playlist program is complete.
3. Use the TRACK NEXT and TRACK PREVIOUS buttons to
enter the track numbers. Press the OK (Green) button twice
after each track is selected.
4. If you enter the wrong track number it can be deleted by
pressing CLEAR. This will clear the last location entered.
Press PROGRAM again to finish programming.
Pressing PLAY will activate your program. The display now shows
the first track that was entered into your program. If PROGRAM is
pressed again you can enter further tracks from the last location in
your program. This can be done either when the Saturn is playing
your program or when stopped. To clear your program, make sure
the Saturn has stopped, then press the clear button.
Note: The program function does not work for MP3 or WMA files.