Abus TVAC70201 Mode D'emploi page 11

Installing and adjusting the camera
2.4.2. Remove the four fixing screws from the
camera slide in the bottom case.
2.4.3. Place the camera centrally on the slide,
ensuring that the screw point on the
bottom of the camera is over the slot in
the slide.
2.4.4. Fix the camera to the slide using a
hexagon socket screw.
2.4.5. Use all the slots on the slide to achieve
the best distance from the camera lens
to the viewing window.
2.4.6. Reinstall the slide on the bottom case.
2.5. Installing the top case
2.5.1. Place the top case on the bottom case
and fix both of the cases into the pins
provided.
2.5.2. Screw the earth cable onto the top case
at the labelled point.
2.5.3. Screw the open end of the earth cable
onto the bottom case at the labelled
point.
2.6. Installing the sun shield
2.6.1. Place the sun shield on the top case of
the weatherproof housing, so that it is
perfectly in line with the back of the top
case.
2.6.2. Install the sun shield with the screws
supplied along the slots.
3. Technical data
· Main fuse: T3.15A
· 2x integrated heating
· Protection class IP68
· Internal cable routing
11