Sunscreening Without Complete Darkness (Ambient Daylight); Glass Units With Solar Protective Coating (Pane Factor) - Velux integra active KRX 100 Guide De Démarrage Rapide

Sunscreening without complete darkness
(Ambient daylight)
When the program VELUX ACtiVE has been enabled,
you can set the sunscreening products to close only
90%. this lets some light into the building but keeps the
heat out.
the example shows how to enable Ambient daylight.
1
Press "Menu".
2
Scroll through the menus:
Program settings ambient daylight
3
the display indicates that the products can be set to
close only 90%.
Press "Continue" to proceed.
4
Press to highlight "Enable".
Press "Enter" to confirm your choice.
5
the display shows that Ambient daylight has been en-
abled.
Note: When Ambient daylight has been enabled, this
setting applies to all sunscreening products registered in
the controller.
40 VELUX
12 : 32
25°C
Menu
ambient DayligHt
the products can
be set to close
only 90%.
Continue?
Continue
ambient DayligHt
enable
Disable
Enter
P1
inFoRmation
ambient daylight
enabled
ENGLISH
Glass units with solar protective coating
(Pane factor)
insulating glass units 57G/57FG, 60G and 76G/76FG
have a solar protective coating which helps provide a
better indoor climate during warm periods of time. if
there are roof windows with these types of insulat-
ing glass units in the building, it can be an advantage
to activate Pane factor. the solar protective coating
keeps out the sun's ray and heat, and as a consequence,
the sunscreening products do not have to be down as
Disable
often. this results in more daylight to the building and
combined with the program VELUX ACtiVE, the solar
protective coating helps improve the energy balance of
the building additionally.
the example shows how to enable Pane factor.
1
Press
2
Scroll through the menus:
Back
Program settings
3
the display shows that Pane factor can be enabled.
Press
Back
P2
4
Press
Press
5
the display shows that Pane factor has been enabled.
Note: When Pane factor has been enabled, this setting
applies to all sunscreening products registered in the
controller.
"Menu".
Pane factor
"Continue" to proceed.
to highlight "Enable".
"Enter" to confirm your choice.
ENGLISH
12 : 32
25°C
Menu Disable
Pane FaCtoR
Pane factor can
can be enabled.
Continue?
Continue Back
Pane FaCtoR
enable
Disable
Enter Back
P1 P2
inFoRmation
Pane factor
enabled
VELUX 41