Installation Instructions - brondell H2O+ H625 Manuel De L'utilisateur

INSTALLATION INSTRUCTIONS

Follow the instruction guide for proper installation
If faucet has threads on the interior (after removing the aerator/faucet spout tip) you
will need to use one of the provided faucet diverter adapters during installation .
Tips
1. Unscrew original aerator (faucet spout tip) from
your water faucet.
2. Connect the faucet diverter to water faucet by
hand tightening using any adapters as needed.
If needed, use a wrench (spanner) or pliers,
but be careful not to over tighten. Use 2 faucet
diverter adapters (included) as needed for proper
connection.
3. Connect the inlet hose to the inlet connection
under the base. Then connect the other end of
the hose to the faucet diverter.
4. Connect the supplied nozzle spout to outlet hole.
Be sure to push in all the way.
5. Make sure the unit is placed securely on a flat
surface and ensure the diverter is in the closed
position to avoid spills.
6. Turn on faucet with cold water, turn diverter to
open position and check all connections. Let
water run through filter for 5 minutes to flush
and activate filter.
DO NOT USE HOT WATER.
5