Powering On And Off - Zagg Nomad Book Instructions

POWERING ON AND OFF

1.
To turn your Nomad Book on, press the Power button located at the top right
corner of the keyboard. A green LED will light briefly.
2.
To turn your Nomad Book off, press and hold the Power button for three
seconds. A red LED will flash indicating it has turned off.
DISCONNECTING THE KEYBOARD
When you'd like to use the case without the keyboard, there are three ways you can
switch to your onscreen keyboard.
1.
Press the Keyboard Hide/Show button. This will disengage the Nomad Book
keyboard and allow you to use your device's on-screen keyboard. Press the
Keyboard Hide/Show button again when you are ready to use your Nomad
Book keyboard.
2.
Turn off the Bluetooth® connection from your device.
3.
Turn your Nomad Book keyboard off.
PAIRING YOUR ZAGG NOMAD BOOK
Your ZAGG Nomad Book can pair with two devices at once. Pairing your Nomad
Book is easy; just follow these instructions.
1.
Ensure your device's Bluetooth® is on.
2.
Press your Nomad Book's 1 or 2 keys for three seconds. A blue LED light under
the key being depressed will begin pulsing, indicating your Nomad Book is in
pairing mode.
3.
Your device will display "ZAGG Nomad Book" as an available pairing option.
Select it and complete any other pairing steps based on your device.
4.
To pair your Nomad Book to another device, repeat steps 2 and 3. To toggle
between devices, simply press 1 or 2.
5.
Once paired, the Bluetooth key will stop pulsing and fade to off. Once begun,
if the Nomad Book doesn't complete pairing after 60 seconds, it will abort the
process. If this happens, repeat steps 2 and 3.
5