Philips SatinPerfect HP6576 Mode D'emploi page 16

EnglisH
16
Problem
4203.000.4617.1.indd 16
Cause Solution
The overload When the overload protection has been activated,
protection is activated the speed setting indications flash red. Turn the discs
because something with your thumb until you can easily remove the
got caught between item that is blocking the rotating discs. Then switch
the rotating discs or on the appliance again. Do not press the appliance
because you pressed too hard onto your skin.
the appliance too
hard onto your skin.
25-11-09 16:21