Bedroom Screen; Bathroom Screen - Dometic Interact Manuel D'utilisation

Operation
Use the toggle button to reset a blown fuse, which sets it
to the enabled (OK) state.
All of the blown fuses appear at the top of the list,
followed by a list of active fuses.
When a fuse blows, the system produces a notification by
showing a number beside the bell icon at the top of each
screen. The system also plays a sound to notify you.
The number on the notification bell icon remains until you
open the Notifications screen and close all notifications,
one-by-one.
Refer to the Notifications Screen section for more
information.

4.1.12 Bedroom Screen

The Bedroom screen allows you to monitor and control
the available components within the bedroom area of
your RV, such as the climate and lights.
Not all systems will include this screen. Control
I
screens vary according to specific system
configurations and available components.
48 Bedroom Screen
From this screen, you can monitor and control the
following functions:
• Temperature: Use the power toggle button to turn
the climate controls on or off. When the power button
is on, you can use the tumbler to select your desired
temperature.
24
• Lights: Use the toggle button for the desired light
source to turn it off or on. The light source brightness is
indicated as a percentage of the maximum intensity.
Tap the brightness indicator for the desired light to
adjust the intensity via vertical slider.

4.1.13 Bathroom Screen

The Bathroom screen allows you to monitor and control
the available components within the bathroom area of
your RV, such as ventilation, water pump, and lights.
Not all systems will include this screen. Control
I
screens vary according to specific system
configurations and available components.
49 Bathroom Screen
From this screen, you can monitor and control the
following functions:
• Lights: Use the toggle button for the desired light
source to turn it off or on. The light source brightness is
indicated as a percentage of the maximum intensity.
Tap the brightness indicator for the desired light to
adjust the intensity via vertical slider.
• Fan: Use the power toggle button to turn the fan motor
on or off.
The lid must be open before the fan motor turns
I
on. If the lid is closed when you attempt to turn the
fan motor on, the lid will open automatically.
Dometic Interact
EN