Safety Instructions; Personal Safety; Operator Safety - Haussmann H2TOOLKIT-18 Guide De L'utilisateur

Masquer les pouces Voir aussi pour H2TOOLKIT-18:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SaFetY InStrUCtIonS

1.work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
b) do not operate power tools in explosive atmospheres, such as
in the presence of flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power
tool. Distractions can cause you to lose control.

2. Personal safety

a) Stay alert, watch what you are doing and use common sense
when operating a power tool. Do not use a power tool while you
are tired or under the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools may result in
serious personal injury.
b) Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes,
hard hat, or hearing protection used for appropriate conditions will
reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the
off-position before inserting the battery, picking up or carrying the
tool. Carrying power tools with your finger on the switch or plugging
in power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power
tool on. A wrench or a key left attached to a rotating part of the
power tool may result in personal injury.
e) do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected
situations.
f) dress properly. Do not wear loose clothing, neckties, or jewelry
that can get caught and draw you into moving parts. Rubber gloves
and nonskid footwear are recommended when working outdoors.
Also wear protective hair covering to contain long hair.

3. operator Safety

a) do not start the tool when it is upside down or when it is not
in the operating position.
b) Switch the motor off and remove the plug when the tool is not
being used, left unattended, being cleaned, being moved from
one place to another or when the extension cord is entangled
or damaged.
c) do not operate the tool near people, especially children or
pets. Turn it off if they get too close. Maintain a safe distance of at
least 5m from other people when using the tool.
d) never direct the blower tube towards bystanders or pets.
Never blow debris in the direction of bystanders or pets. The
operator is responsible for accidents or hazards occurring to other
3

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

59595080

Table des Matières