Typical Installations - Joneca American Standard ASD-2125-HT Mode D'emploi

*Approximate Dimension
ASD-2125-HT 10.5 in
ASD-3125-HT 10.5 in
ASD-2125-HT & ASD-3125-HT
7.9"
15.4
6.5"
REGISTER YOUR AMERICAN STANDARD DISPOSER
Register to enable us to provide the best service possible.
REGISTRATION INFORMATION
Date of Purchase
NAME:________________________________________________________________
TEL: (_____)___________________________________________________________
ADDRESS:____________________________________________________________
CITY:____________________________ STATE:________ ZIP CODE:________
EMAIL:

TYPICAL INSTALLATIONS

SINGLE BOWL
MOUNTING THE SILVER GUARD®
After the disposer is fully mounted to
the sink, guide the Silver Guard®
through the mount screws (6A) with
the flat portion of the black strap
facing the metal sink flange. Place the
Silver Guard® between the Support
6.7"
Flange and Upper Mount Ring.
Please note (6B) that the Silver
Guard® must be placed under the
flange of the Support Ring. Once the
Silver Guard® is fitted, firmly press on
3.9"
the snaps to secure the strap (6C).
Purchased From
DOUBLE BOWL CENTER OUTLET
*approx
6A
Model #
Serial #
power cord tag.
Mail back this form, or go to
www.JonecaProductRegistration.com
to register.
8
DOUBLE BOWL END OUTLET
*approx
6B
WARNING: This is not a toy. Keep uninstalled Silver
Guard® away from children.
Supplied By
Hush-Tek
Joneca Corporation
*approx
6C