Operation-Dvd - Rockford Fosgate RAV Serie Manuel D'installation Et Fonctionnement

Masquer les pouces Voir aussi pour RAV Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

O
– DVD
PERATION
1
2
4
5
CAUTION:To prevent accidents, never use the video screen to view DVDs or make
menu selections while driving the vehicle.
NOTE: This unit only plays Region 1 encoded discs.
NOTE: If a
(prohibited symbol) appears on the video screen when pressing a button, that feature
either has been disabled for that time or is not usable for the disc being played.
1.
OPEN (Video Screen)– Opens and closes the video screen. Press and hold to lay the video screen
flat down without fully retracting.
2.
I/O (In/Out - Video Screen)– While the screen is in the full open position, use to slide the screen
slightly inward or outward. Once set, the unit will remember the position whenever the screen is
opened.
3.
TILT – Up or DOWN (Video Screen)– Use to tilt the screen in 5° increments either UP (back)
or DOWN (forward). Once set, the unit will remember the position whenever the screen is opened.
4.
VOLUME (PUSH PWR OFF / ENTER) – Used to control volume level. Push and hold to turn
the unit off. Press to select highlighted items in menus.
5.
Down – Press to select the previous chapter. Press and hold for Fast Reverse.
6.
Up – Press to select the next chapter. Press and hold for Fast Forward.
7.
MODE – Selects between DISC/RADIO TUNER/TV TUNER/AUX 1/AUX 2 modes.
8.
(Back) – Not Available
9.
(Forward) – Not Available
10. SETUP – When pressed, enters into the GRAPHIC EQ adjust ment screen. Press and hold to enter
set-up menu; MODE (Mode selection and preferences) GRAPHIC EQ, AUDIO (fine tuning speaker
adjustments) and SPK EQ (Speaker EQ for setting basic EQ styles, Classic, Jazz, Pop, Rock, and Vocal, as
well as setting speaker size and availability).The video screen must be in the viewing position to use
these menus.
11. PUNCH – Enables both bass and treble responses to be boosted and selects the boost level.
12. DISP – Press to show disc information, titles, chapters and elapsed time. Press and hold to enter in
to a screen adjustment menu for BRIGHT, DIMMER,TINT and COLOR.The video screen must be in
the viewing position and a disc inserted to use this menu.
13. BSM (Best Station Memory) – Not Available
14. P/SCAN (Preset Scan) – Press and hold to change the screen size shown on the display, Full, Fit or
Standard.
15. MUTE – Mutes audio.
16.
(Eject) – Press to eject disc.
24
6
7
8
9
10
11
3
12
13
14
15 16

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Rav dvd2

Table des Matières