Kalorik WM 47669 Mode D'emploi page 6

OPERATION
1. Place the appliance on a flat, level surface.
2. Uncoil the cord completely. Check if the heating plates are clean
and dust-free. If necessary, wipe them with a damp cloth and let
dry before use.
3. Connect the plug to a power outlet. The unit will turn on
automatically, signaled by a red indicator light. Keep the appliance
closed as it heats up. Once the unit has finished preheating (in
about 2 to 3 minutes) the green light will turn on to indicate the
waffle maker ready to use. Please note, when ready to use both the
red and green indicator lights will be on.
4. Open the appliance and lightly brush the plates with oil or non-stick
cooking spray.
5. Pour the waffle mixture in the center of the bottom plate. If needed,
use a silicone or heat-proof spatula to help spread the batter,
depending on consistency.
6. Close the appliance. The green light will turn off during the cooking
time. After about 5-9 minutes, (depending on batter), your waffles
are ready. Please note, the green light may come on and off
regularly during use. This simply means that the thermostat is
regulating the appliance's temperature. If you want to cook the
waffles more, simply close the appliance and cook until desired
doneness is achieved.
7. Once cooking is complete, use a spatula or tongs to help you
remove the waffles from the iron. Do not try to grab the appliance
while it is plugged in or lift it from its place, as the outside can get
very hot. For extra caution, use heat-proof gloves when handling
this appliance.
Notes:
― Depending on batter consistency and taste, cooking times will vary.
Most batter will cook in 5-9 minutes, depending on desired level of
browning.
― The first pre-heating should be done without any food on the
heating plates. In order to remove any factory residue, plug in the
appliance and let it heat for about ten minutes before turning on.
www.KALORIK.com
6
WM 47669 - 210121