Cleaning And Care - Klarstein BAROSSA 34 DUO Mode D'emploi

CLEANING AND CARE

Cleaning
• Before cleaning your appliance (something to be done regularly), disconnect it by
removing the plug or by pulling the fuse on the circuit.
• Before using your appliance for the first time and regularly after that, we
recommend that you clean the inside and outside (front, sides and top) with warm
water mixed with a gentle cleaning product. Rinse with clean water and allow to
dry before reconnecting. Do not use solvents or abrasives.
• When the appliance is switched on for the first time, there may be a residual
odour. In that case, run the appliance empty for a few hours at the coldest possible
temperature. The cold will kills any odours.
• Wash the plastic coating on the steel shelves with a mild detergent solution.
Storage
If you will not be using your appliance for short periods, leave the control panel with its
usual settings.
During an extended shutdown:
• Remove all bottles from the appliance
• Unplug the appliance
• Thoroughly clean the inside and outside of the appliance.
• Leave the door open to prevent condensation, unpleasant odours and mould.
EN
35