Aiwa MSBTU-300 Mode D'emploi page 3

4
en
SAFETY PRECAUTIONS
1. READ INSTRUCTIONS:
All the safety and operating instructions
should be read before the product is
operated.
2. RETAIN INSTRUCTIONS:
The safety and operating instructions
should be retained for future reference.
3. HEED WARNINGS:
All warnings on the product and in the
operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS:
All operating and use instructions should
be followed.
5. CLEANING:
- Unplug this product from the wall outlet
before cleaning.
- Do not use liquid cleaners or aerosol cleaners.
- Use a damp cloth for cleaning.
6. WATER AND MOISTURE:
Do not use this product near water.
For example:
Near a bath tub, wash bowl, kitchen sink,
or laundry tub; in a wet basement; or near
a swimming pool; and the like.
7. ACCESSORIES:
Do not place this product on an unstable
cart, stand, tripod, bracket, or table.
The product may fall, causing serious
injury to a child or adult and serious
damage to the product.
Use only with a cart, stand, tripod,
bracket, or table recommended by the
manufacturer, or sold with the product.
Any mounting of the product should
follow. The manufacturer's instructions,
and should use a mounting accessory
recommended by the manufacturer. A
product and cart combination should be
moved with care - quick stops, excessive
force and uneven surfaces may cause
the product and cart combination to
overturn.
8. VENTILATION:
Slots and openings in the cabinet are
provided for ventilation and to ensure
reliable operation of the product and
to protect it from overheating, and
these openings must not be blocked or
covered. The openings should never be
blocked by placing the product on a bed,
sofa, rug or other similar surface. This
product should not be placed in a built-in
installation, such as a bookcase or rack,
unless proper ventilation is provided or
the manufacturer's instructions have been
adhered to.
9. POWER SOURCES:
This product should be operated only
from the type of power source indicated
on the marking label. If you are not sure
of the type of power supply of your
home, consult your product dealer or local
power company. For products intended
to operate from battery power, or other
sources, refer to the operating instructions.
10. POWER-CORD PROTECTION:
Power-supply cords should be routed so
that they are not likely to be walked on or
pinched by items placed upon or against
them, paying particular attention to cords
at the power plug and jack plug socket.
11. NON-USE PERIODS:
The power cord of the product should
be unplugged from the outlet when left
unused for long periods of time.
12. LIGHTNING:
For added protection for this product
during a lightning storm, or when it is left
unattended and unused for long periods
of time, unplug it from the wall outlet and
disconnect the antenna or cable system.
This will present damage to the product
due to lightening and power-line surges.
SAFETY PRECAUTIONS
13. POWER LINES:
An outside antenna system should not
be located in the vicinity of overhead
power lines, other electric light or power
circuits, or where it can fall into such
power lines. When installing an outside
antenna system, extreme care should be
taken to keep away from touching such
power lines or circuits as contact with
them might be fatal.
14. OVERLOADING:
Do not overload wall outlets, extension
cords, or integral convenience receptacles
as this can result in a risk of fire or electric
shock.
15. OBJECT AND LIQUID ENTRY:
Never push objects of any kind into
this product through openings as they
may touch dangerous voltage points or
short-out parts that could result in a fire
or electric shock.
Never spill liquid of any kind on the
product.
16. SERVICING:
Do not attempt to service this product
yourself as opening or removing covers
may expose you to dangerous voltage or
other hazards. Refer to all servicing to
qualified service personnel.
17. DAMAGES REQUIRING SERVICE:
Unplug this product from the wall outlet
and refer servicing to qualified service
personnel under the following conditions.
a) When the power-supply cord or plug
is damaged.
b) If the product has been exposed to
rain or water.
c) If liquid has been spilled, or objects
have fallen into the product.
d) If the product does not operate
normally by following the operating
instructions, adjust only those
controls that are covered by the
operating instructions, as an
improving adjustment of other
controls may result in damage and
will often require extensive work by
a qualified technician to restore the
product to its normal operation.
e) When the product exhibits a
distinct change in performance
it indicates a need for service.
18. SPARE PARTS:
When spare parts are required, be sure
the service technician has used replacement
parts specified by the manufacturer or
having the same characteristics as the
original part, unauthorized substitutions
may result in fire, electric shocks and
other hazards.
19. HEAT:
The product should be situated away from
sources such as radiators, heat registers,
stoves or other products that produce heat.
5