Intended Use - Hilti C 4/36-90 Mode D'emploi

where it can be kept under observation and allowed to cool down. In this
case, always contact your Hilti Service.
3 Description
3.1 Product overview
Release button with additional
@
function (state of charge dis-
play activation)
Battery
;

3.2 Intended use

The product described is a battery charger for Hilti Li-Ion batteries with a
rated voltage of 7.2 to 36 volts. It is designed to be connected to power
outlets providing an AC (alternating current) voltage of 100 to 127 volts or
220 to 240 volts (depending on country-specific version).
The C4-36-DC charger can be connected to a 12 volt or 24 volt DC electric
supply socket in a motor vehicle.
The batteries approved for use with this product are listed at the end of this
document.
Not all batteries are available in all markets.
3.3 Information displayed
3.3.1 Information displayed by the charger and battery
Display
LED lights constantly.
Blinking.
LED doesn't light.
3.3.2 Li-ion battery state of charge display
Status
4 LEDs light.
3 LEDs light, 1 LED blinks.
2 LEDs light, 1 LED blinks.
1 LED lights, 1 LED blinks.
6 English
Printed: 03.01.2019 | Doc-Nr: PUB / 5069441 / 000 / 12
1
=
%
&
On the battery
Indication of state of
charge.
Charging is in
progress.
Green LED on the
charger lights con-
stantly , no LEDs light
on the battery: Battery
malfunction.
Meaning
State of charge: 100 %
State of charge: 75 % to 100 %
State of charge: 50 % to 75 %
State of charge: 25 % to 50 %
Battery state of charge LED
indicators
Indicator LED
Battery interface
2
On the charger
The charger is con-
nected and ready for
operation.
The battery is too hot
or too cold.
Charger malfunction.
2
2024462
*2024462*