Zotac ZBOX Guide D'installation Rapide page 3

Package contents
• 1 x ZOTAC ZBOX
• 1 x AC Adapter
• 1 x Power Cord
• 1 x Warranty Card
• 1 x User Manual
• 1 x Driver disc
• 1 x USB drive with O/S driver (optional)
Customizing your ZOTAC ZBOX
1. Hold the ZOTAC ZBOX with two hands, and
rotate the cover counterclockwise.
2. Make sure the Press Stripe locate at "Unlock"
logo, and remove the cover off the ZOTAC
ZBOX.
Installing memory modules
1. Locate the SO-DIMM memory slots and insert a SO-DIMM
memory module into the slot at a 45 degree angle.
(Note: If the ZOTAC ZBOX has two SO-DIMM slots insert a module
into the lower slot first)
2. Gently press down on the memory module until it locks
into place by the arms of the memory slot.
Installing a hard disk
1. Insert the hard disk into the slot at a 45 degree
angle and gently slide into the connector.
2. Install the screw.
2
1
1 2
1 2
2