poolstar Z-RAY RANGER Serie Manuel D'instruction page 23

Inflating
Caution: Do not over inflate, or use a high-pressure pump!
Please inflate air chambers by number sequence. Do not over inflate.
Maximum pressure for air chambers
After inflating screw the valve cap A in clockwise direction by hand.
Deflating
Remove the valve cap A, push down the deflation button C and turn the valve
by 90° until its is locked. Release the valve and the air will flow out. If you want
to stop the deflation, push down the deflation button C and turn it by 90°. The
deflation will stop when the valve is released.
9
ASSEMBLING
0.25bar(3.63PSI) for chamber 1,2,3
0.35bar(5.08PSI) for chamber 4
www.zraysports.com
23
ZBII1-18-GB