Ricoh D3210 Mode D'emploi page 37

• When performing maintenance on the machine, disconnect the power cord from the wall outlet
for safety.
• When moving the machine, be sure to turn off the power and unplug the power cord from the
wall outlet, and then confirm that line cords and other connecting cables have been removed.
Otherwise, the power cord is damaged, possibly resulting in fire or electric shock.
• Never use a power cord which appears damaged or frayed, or change the plug type on the
power cord.
• Be aware of the power loading when you use extension cords or multiple outlet power boards.
• Do not turn the main power switch off or remove the power cord while power is being supplied to
the machine. Doing so may ruin the flash memory drive or cause other damage.
1. Plug one end of the power cord into the AC In jack on the machine and the other end into
an appropriate power outlet.
If the outlet is switched, turn on the switch.
Connecting Power
DYS111
33