Before First Use; Preparing For Use - Philips AVENT SCF288 Instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EngliSh
8

Before first use

When you use the appliance for the first time, we advise you to let it complete one sterilization
process with empty baskets.
Note: Heating up takes approx. 4 minutes and sterilizing takes approx. 6 minutes.
Use a baby bottle and pour exactly 3.4 fl. oz. (100 ml) of water directly into the water
1
reservoir of the base (Fig. 2).
Place the large basket on the base (Fig. 3).
2
Place the small basket on the large basket (Fig. 4).
3
Place the lid on top of the small basket (Fig. 5).
4
5
Put the plug in an electrical outlet.
Press the power-on button to turn on the appliance. (Fig. 6)
6
Note: If you plug the appliance into the electrical outlet after you have pressed the power-on button, the
sterilizer starts to heat up immediately.
SCF287/SCF286
The sterilizing light lights up to indicate that the appliance is on.
,
When the sterilization process is finished, the ready light goes on. After 3 minutes the ready
,
light goes out to indicate that you can now safely open the sterilizer.
SCF288/SCF285/SCF284
The sterilizing light lights up to indicate that the appliance is on.
,
When the sterilization process is finished, the appliance turns off automatically.
,
After the appliance has cooled down completely, remove the lid, the small basket and the
7
large basket and wipe them dry.
Let the appliance cool down completely for approx. 10 minutes before you use it again.
8
Note: The appliance does not work for 10 minutes after a sterilizing cycle. It needs to cool down first.

Preparing for use

Preparing for sterilizing
Before you put the items to be sterilized in the sterilizer, clean them thoroughly in the dishwasher or
clean them by hand with hot water and some liquid soap.
Using the dishwasher basket (SCF288/SCF287/SCF286 only)
Use the dishwasher basket to preclean the items you want to sterilize.
Open the two sections of the lid of the dishwasher basket and place the bottles and
1
accessories in the basket (Fig. 7).
Note: Make sure that the bottles are placed upside down.
Close the two sections of the lid of the dishwasher basket (Fig. 8).
2
Place the basket in the dishwasher.
3
Switch on the dishwasher and let it complete the dishwashing cycle.
4
5
When the dishwasher is finished, take out the dishwasher basket and make sure that the
dishwasher basket and all items to be sterilized, are clean. If not, clean them by hand.
Place the dishwasher basket completely into the large basket of the sterilizer.
6
Note: You can leave the dishwasher basket inside the large basket with the two sections of the lid opened.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Avent scf287Avent scf286Avent scf285Avent scf284

Table des Matières