Dacor DTG30P875N Serie Manuel D'installation page 19

Round Burner head
Burner Head
Install_DTG36P875N_DG68-01286A-00_EN+MES+CFR.indb 19
2. Install the burner head so that the
electrode passes through the opening for
the electrode. Make sure the burner head
lies flat on the stove top.
1. Orient the burner head so that the
opening for the electrode lines up with
the electrode.
2. Install the burner head so that the
electrode passes through the opening for
the electrode. Make sure the burner head
lies flat on the stove top.
CAUTION
Make sure all burner components (heads
and caps) are reinstalled properly. They
will be stable and rest flat when correctly
installed.
Burner Cap
Burner cap
Top Bottom
1. Match the burner caps to the burners by
size, and then re-install the caps on the
burner heads.
CAUTION
Make sure each cap is re-installed on the
correct burner head, is centered on the
burner head, and lies flat.
CAUTION
Make sure all burner components (heads
and caps) are reinstalled properly. They
will be stable and rest flat when correctly
installed.
NOTE
The precise simmer burner (RR) cap and
the inner Dual burner (Center) cap are
interchangeable.
English 19
2020-05-27 11:00:38