Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operating instructions Hydraulic crimping tool 240
Contents
1.
Introduction
2.
Safety requirements
2.1
General safety requirements
2.2
Additional safety requiremens
3.
3.1
3.2
3.3
4.
5.
5.1
5.1.1
5.2
5.3
5.3.1
5.3.2
Crimping action
5.4
6.
6.1
6.2
Service Hotline
1. Introduction
Thanks for your decision to purchase the hydraulic tool 240 for crimping cable lugs. The installation manual will provide a detailed description on how to
operate this equipment safely.
Please treat this document with care and make sure that it is read, understood and followed by all operating personnel.
2 Safety requirements
2.1 General Safety requirements
Machinery with moving parts always bears the risk of bodily injury and requires specific caution and carefulness.
To minimize the risk, please read this manual carefully before operating this equipment.
•
this equipment may only be operated in faultless condition
•
variations have to be reported to the supervisor immediately
•
the work environment has to be tidy
•
the work place has to be well illuminated
•
potentially leaking oil (leak) has to be cleaned up immediately
•
operating personnel is required to wear proper safety apparel (gloves, antislip work shoes, safety glasses)
•
work at the machine is prohibited if concentration could be affected (e.g. through drugs or alcohol)
•
keep away children
The equipment is not designed and intended for any other work than described in this manual. In the case of misapplication,
we will not be reliable for any resulting damages.
6
Hydraulic crimping tool 240
2695-7240-01-00
Drawing: Hydraulic tool for crimping cable lugs and butt connectors
Publicité
Chapitres
Table des Matières
