Safety Instructions; Technical Data - Rohr DFC-10P Mode D'emploi

DFC-10P / DFC-50P / DFC-450P / DFC-650P

Safety Instructions

Please read and understand this manual and the manual for the product / battery you are
intending to charge before operating this device. Keep this manual for future reference.
1. Only use this device indoors and for its intended use.
2. No warranty is offered for damages resulting from improper use or incorrect operation of this device.
3. This device is not intended to be used by persons (including children) with limited physical, sensory
or mental aptitude or lack of experience and/or knowledge.
4. In the event of a fault or failure, any repairs to this battery charger must be done by a qualified
person authorised by the manufacturer.
5. Keep the power cable away from sources of heat and check the condition of it regularly. If it's
damaged, have the cable replaced by a qualified person.
6. Do not use the charger if damaged or defective and do not charge disposable, frozen or damaged
batteries.
7. Protect the charger against the elements, especially rainfall. Use the device in well ventilated areas
only.
8. Do not leave the charger connected to a power supply when not in use.
9. When charging, batteries emit gasses that may be explosive. Keep away from any heat sources.
10. Make sure the battery charger is disconnected from a power source when connecting to a battery.
11. Never place a battery right under or on top of the battery charger. Place the battery charger as far
away from the battery as possible. Never place the battery charger under the bonnet.
12. Always make sure the car and battery manufacturers permit the use of a battery charger jump start
prior to using this function (applicable models only).
13. Warning, danger to life - when cleaning, never immerse the device in water or other liquids and
never open the product housing.

Technical Data

INPUT
MODEL VOLTAGE
(V)
DFC-10P 230
DFC-50P 230
DFC-450P 230
DFC-650P 230
OUTPUT CHARGING
CHARGING
VOLTAGE CURRENT
CURRENT
(V) (A)
6/12 5/8
12/24 20/30
12/24 40/50
12/24 60/70
MAX
STARTING
FUNCTION CURRENT
(A)
10 Charge N/A
Charge/
45 130
Start
Charge/
70 300
Start
Charge/
100 480
Start
© ROHR
English
CHARGING STARTING
INPUT INPUT
(A) POWER (W) POWER (W)
250 N/A
950 6400
1200 8500
2200 12000
BATTERY
CAPACITY
20-150ah
50-350ah
100-
700ah
120-
1000ah
5