LUTEC 12513LE-SL Manuel D'utilisation page 6

ASSEMBLY INSTRUCTIONS
Remove the preassembled Set Screw (C1) from Top Pole (C) and screw Top Pole (C) clockwise
onto Middle Pole (E). Re-insert Set Screw (C1), then tighten with Allen Wrench (D). Remove the
preassembled 3 Base Screws (F1) from Base (F) with a Phillips screwdriver (not included).
Save for later use.
4
A
A1
B1
B
Secure Middle Pole (E) to Base (F) with Base Screws (F1). Tighten with a Phillips screwdriver.
Remove Thumbscrew (A1), then detach Solar Panel Top (A) from Lamp Head (B). Take out
Solar LED Bulbs (B1) from their shipping boxes.
6