Electrical Connection; Daily Use; Temperature Setting - FAR R2706WDW Manuel D'utilisation

ENGLISH

Electrical connection

Before plugging in, ensure that the voltage and frequency shown
on the rating plate correspond to your domestic power supply�
The appliance must be earthed� The power supply cable plug is
provided with a contact for this purpose� If the domestic power
supply socket is not earthed, connect the appliance to a separate
earth in compliance with current regulations, consulting a
qualified electrician�
The manufacturer declines all responsibility if the above safety
precautions are not observed� This appliance complies with the
E�E�C� Directives�

Daily use

First use
Cleaning the interior
• Before using the appliance for the first time, wash the interior
and all internal accessories with lukewarm water and some
neutral soap so as to remove the typical smell of a brand new
product, then dry thoroughly�
Important! Do not use detergents or abrasive powders, as these
will damage the finish�

Temperature Setting

• Plug on your appliance� The internal
temperature is controlled by a
thermostat� There are 8 settings �
1 is warmest setting and 7 is coldest
setting and 0 is off�
• The appliance may not operate at
the correct temperature if it is in a
particularly hot or if you open the
door often�
ENGLISH