Reverse Door - FAR R2706WDW Manuel D'utilisation

ENGLISH

Reverse Door

Tool required: Philips screwdriver, Flat bladed screwdriver,
Hexagonal spanner�
• Ensure the unit is unplugged and empty�
• To take the door off, it is necessary to tilt the unit backwards�
You should rest the unit on something solid so that it will not
slip during the door reversing process�
• All parts removed must be saved to do the reinstallation of the
door�
• Do not lay the unit flat as this may damage the coolant
system�
• It's better that 2 people handle the unit during assembly�
1� Remove four screws in top cover and
then lift it�
2� Unscrew top hinge and then remove
upper door and place it on a soft pad
to avoid scratch�
4
unscrew
3� Remove the pin with a screwdriver
and flip the hinge bracket� Then refit
the pin to hinge bracket�
4� Unscrew middle hinge� Then lift
lower door and place it on a soft pad
to avoid scratch�
5� Move the hinge hole covers from left
side to right side�
6� Unscrew bottom hinge� Then remove
the adjustable feet from both side�
Note: remove this screw if it presents
ENGLISH
180°
4