FAR R2706WDW Manuel D'utilisation page 25

ENGLISH
7� Unscrew and remove the bottom hinge pin, turn the
bracket over and replace it�
Unscrew
8� Refit the bracket fitting the bottom
hinge pin� Replace both adjustable
feet� Transfer the lower door to the
property position�
9� Make the middle hinge reverse the
direction180°C, then transfer it to
the left property position� Make the
middle hinge pin in the upper hole of
the lower door, then tight the bolts�
4
screw
10� Place the upper door back on� Ensure
the door is aligned horizontally and
vertically so that the seal are closed
on all sides before finally tightening
the top hinge� Then inert the hinge
and screw it to the top of the unit�
11� Put the top cover and then screw
back�
ENGLISH
4