Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
• Unplug the charging cable from the device, which is now ready for use.
• If the battery level is low, the LED indicator
beep' tone, indicating that the battery needs to be recharged.
Note! Please fully charge the device before first use.
Power ON/OFF:
• Power ON: Press the power button
LED indicator
C
• Power OFF: Press the power button
LED indicator
C
When the device does not have a BT connection for 10 minutes, it will
automatically switch OFF.
Making a BT connection (BT pairing):
• Power on the device by pressing the power button
• A
will be heard and the LED indicator
tone
device is now in pairing mode.
• Keep the device and your BT enabled device within 1 M (3 ft) of each other during
the BT pairing process.¬
• Make your mobile phone, tablet or other BT enabled device search for compatible
BT devices. (Make sure the BT function is turned ON).
• When your BT enabled device finds the device, select "DO-SV-ANC01" from the
list of found devices.
• A twin tone will sound to indicate successful pairing. The LED indicator light
stop flashing blue/red alternately and light up blue indicating successful pairing. No
password is needed. If a password is required please enter: 0000.
• If a paired BT enabled device is in range, the device will connect automatically when
it's in range.
• When the device does not have a BT connection for 10 minutes, it will
automatically switch OFF.
NOTE!
If you would like to connect the device to another BT enabled device, you must
first disconnect it from the active paired BT enabled device. Go to your BT enabled
device's BT settings, select "DO-SV-ANC01", and select "disconnect" or "unpair".
You can also simply switch off the BT function. When the device has been unpaired
and/or does not have an active paired BT connection, repeat the pairing process with
the (new) BT enabled device you want to connect to the device.
Listen to music:
If you want to play and/or pause music from your connected BT enabled device, open
your media player and press play.
Control play/pause, track & volume on your BT enabled device or with "control
buttons"
&
D E
EN 04
will flash blue/red alternately. The device is now in stand-by mode.
will turn off.
of the device. (in BT mode)
F
flashes red and you will hear a 'triple
C
for ± 3 seconds. You will hear a
D
for ± 3 seconds. You will hear a
D
D
will flash blue/red alternately. The
C
'tone'
for ± 3 seconds.
& the
'tone'
& the
will
C
Publicité
Table des Matières
