Using The Device - Dutch originals DO-SV-ANC01-B Manuel D'utilisation

• Never leave the device to charge unattended.
• Regularly check the power cord for damage.
• Do not use the device if the power cord shows signs of damage.
• Make sure the power cord cannot be trodden on or pinched.
• Do not allow the power cord to hang over sharp edges and keep it away from hot
objects and naked flames.
• Do not use the device if it has a damaged power cord, if it has become faulty, or if
it has fallen or become damaged in any way. Send the device to the manufacturer or
the closest qualified service centre for inspection.
• Ensure that the device and power cord do not come into contact with heat sources,
such as hotplates or naked flames.
• Always remove the charger cable from the device once charging has been
completed.
• Do not attempt to charge the device when the battery is damaged.
• To reduce or prevent the risk of personal injury, electrical shock, fire or damage to
the device, never insert metal objects in any opening of the USB charging port.
• The rechargeable battery is built into the device and cannot be replaced.
• WARNING! Do not open the casing as this may result in electric shock!
• Do not expose the device to excessive heat sources like fire or direct sunlight.
• Do not use or store the device in the immediate vicinity of heat sources such as
naked flames.
• Do not crush, puncture or dismantle the device; this might damage the battery.
• WARNING! Damaging the casing and/or piercing the device, can lead to
explosion or fire!
• Leaks from battery cells can occur under extreme conditions. If the liquid gets on
the skin, wash it immediately with soap and water. If the liquid gets into the eyes,
flush them immediately with clean water for a minimum of 10 minutes and seek
medical attention.
• WARNING! Do not throw the device into a fire because it may explode!
• Do not dispose of the device in your household waste. Take it to your local recycling
station. Contact your local government offices for details.
Cleaning:
• Before cleaning the device, always disconnect the device from the power cord.
• Do not use abrasive cleaning solvents to clean the device.
• Clean the exterior of the device with a damp cloth.

3) USING THE DEVICE

Charging:
• Carefully plug the micro USB connector into the micro USB charging port
device.
• Plug the USB connector of the charging cable into a USB port on your computer or
USB charger.
• The LED indicator
• Once charging is complete, the LED indicator
device will automatically stop charging.
will light up red, indicating the device is charging.
C
will no longer light up and the
C
of the
A
EN 03