Connect The Ac7046; Monitor Setup - ACT AC7046 Manuel

3.0 Connect the AC7046

a. Connect the plug of the power supply to the DC connector of the docking station
and then connect the other end of the power supply into the wall outlet.
b. Connect the supplied USB-C cable to the USB-C host connector on the docking
station and the other end to the USB-C connector of your computer.
c. Connect the docking station to your HDMI and DP display(s)
d. Connect the docking station to:• USB peripherals • Audio devices • Gigabit
Ethernet

4.0 Monitor setup

Your USB-C device needs to support DP-Alternate mode or Thunderbolt™3 on its
USB-C port in order to display your video output to 1 or more displays. Check the
technical specifications of your USB-C device if it supports DP-Alternate mode or
Thunderbolt™3. If the device does not support DP-Alternate mode or Thunderbolt™3,
the AC7046 will not be able to display video onto your Display(s).
Please Note!!! For the AC7046 to be able to display the max resolution of 4K on all
three monitors your PC/Notebook needs to support additionally DP1.4 and DSC
5 |
ENGLISH