Before Operating; To Set The Clock; Timer; Stop/Clear - Dacor MMDV30S Mode D'emploi

Before operating your new Microwave In-A-Drawer
sure you read and understand this manual completely.
• Before the Microwave In-A-Drawer
follow these steps:
1. Plug in the Microwave In-A-Drawer
MICRO- WAVE TOUCH CLEAR
will appear.
CLOCK
2. Touch the STOP/CLEAR key.
3. Set the clock.

To Set The Clock

1. Touch the TIMER/CLOCK key and number
2. Touch the number keys for correct time of day and
touch the TIMER/CLOCK key again.
This is a 12 hour clock. If you attempt to enter an incorrect
clock time, will appear in the display. Touch the
ERROR
STOP/CLEAR key and re-enter the time.
• If the electrical power supply to your Microwave
In-A-Drawer should be interrupted, the display will
™
intermittently show
TOUCH CLEAR
AND
power is restored. If power is interrupted during cook-
ing, the program will be erased. The time of day will
also be erased. Simply touch the STOP/CLEAR key
and reset the clock for the correct time of day.
NOTE:
• The Microwave In-A-Drawer
with the drawer open except for the START/EASY
MINUTE feature.

before operating

can be used,
™
.
™
ENJOY
AND TOUCH
will appear.
:
2
ENJOY YOUR
MICRO-
after the
TOUCH CLOCK
can be programmed
™
make
™

Timer

1. Touch the
2. Enter time.
YOUR
3. Touch the
4. To cancel timer, touch the

Stop/Clear

Touch the STOP/CLEAR key to:
1. Clear a mistake made during programming.
2. Cancel the timer.
.
3. Stop the Microwave In-A-Drawer
timed cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice for
timed cooking.

open or Close Drawer

WAVE
Always press the OPEN or CLOSE key on the control
panel to open or close the drawer.
Do not push or pull the drawer by hand, except in case of
emergency, such as during a power failure. If necessary,
push or pull slowly.
E7
TIMER/CLOCK key and number
TIMER/CLOCK key again.
STOP/CLEAR.
temporarily during
™
.
1