Marantz DV4001 Mode D'emploi page 40

6 DVD Setup Menu
HDMI VIDEO
• Default setting: AUTO
Selects a suitable video resolution depending on the capability of the connected TV/device to
enhance the HDMI video output.
• 480P/525P – Progressive output in 480 lines for NTSC TV
• 576P/625P – Progressive output in 576 lines for PAL TV
• 720P – (if a HDMI TV is connected) Progressive output upscaled to 720 lines
• 1080i – (if a HDMI TV is connected) Interlaced output upscaled to 1080 lines
• AUTO – The video output will automatically follow the display's supported resolution
Note
• If no display appears on the TV due to an unsupported resolution, use the composite video cable to connect the
DVD system and your TV. Turn on your TV to the correct input channel for the composite video and adjust the
resolution setting to 480P/576P.
• The resolution can also be set with the HDMI button on the front panel.
• In general, the larger the number, the higher the resolution.
• When the resolution is changed, the image may be corrupted or the output may take longer than normal.
• Pressing the HDMI button for three seconds or more toggle the HDMI on/off state.
Setup Examples
Resolution
(HDMI Setting)
480P/525P
576P/625P
720P
1080i
AUTO
Some monitors may use setting names that are different than those shown here.
*1
If the aspect ratio you desire is not available, select the most suitable setting from SUPERWIDE, 16:9 SQUEEZE and
OFF in "WIDE SCREEN FORMAT".
VIDEO OUT
HDMI Video Output
480P
576P
720P
1080i
40
Disc Recorded in Squeeze Ratio
TV ASPECT
16:9 WIDE
The resolution is automatically selected to match the monitor you are using. Set TV SYSTEM, WIDE
SCREEN FORMAT and your monitor setting to match the selected resolution.
YCbCr Output
480P (NTSC progressive)
576P (PAL progressive)
Follow the Disc Source with Progressive output.
(ex: NTSC disc is played: NTSC Progressive
out.)
Playback Disc
Monitor Setting TV ASPECT
Full/Squeeze
SUPERWIDE
16:9 SQUEEZE
Normal/Through
Follow the Disc Source with Interlace output.
(ex: NTSC disc is played: NTSC interlace out.)
Disc Recorded in 4:3 Ratio
Monitor Setting
Standard
Normal
4:3
*1
OFF
Through
Composite/S-Video output