Default Setting - YAKUMO Power E-Net 85 Manuel

Set device Password
You may need to set device password in order to create network groups. Click on a
device then click "Enter Password". Type DEK number then click "OK". You may find
the DEK number showed on a label which is stuck on the back of device.
Manually scan status of devices
Click "Scan" to refresh current status of all connected devices.
2. Privacy: Security setting for the PowerLine network. You may create network groups in the
same PowerLine network.

Default setting

HomePlug is the default network group name for all devices.
Rename network group
Type a new name in Private Network Name for the PowerLine which is connected to
the local PC you are using and click "OK".
23