Connecting To The Network Through Lan Interface; Plugging In The Receiver; Turning The Power On - Pioneer SC-LX59-K Guide Rapide

If you have a Mac/PC

Connecting to the network through LAN interface

Internet
When connecting this receiver to a wireless LAN router by Wi-Fi, refer to the "Basic Setup" → "Setting by referring to the
operating instructions" → "Setting network connection" in the CD-ROM's operating instructions.
4
Modem
Computer
LAN cable (sold separately)
NETWORK
Router
WAN
LAN
1
2
3
NETWORK

Plugging in the receiver

After connecting to a LAN, connect the power cord of the
receiver to a power outlet.
1
Plug the supplied power cord into the AC IN socket on the
back of the receiver.
2
Plug the other end into a power outlet.

Turning the power on

Press STANDBY/ON to switch on the receiver and your
computer.
Wait a few minutes after turning the power on before
performing the following operation.
STANDBY/ ON