Publicité
Les langues disponibles
Les langues disponibles
Keep batteries out of children's reach. Be particularly careful in the presence of children.
Batteries are special waste and do not belong into household waste!
You can correctly dispose of the empty batteries in shops for electrical supplies, in our
branches or in the headquarters in Hirschau and at the municipal disposal sites (collection
points) in the collection containers intended for this purpose. Make your contribution to the
protection of the environment!
Leaking or damaged batteries may cause burns in case of contact with the skin; please use
suitable safety gloves in this case.
Make sure that the batteries are not short-circuited. Explosion hazard.
Do not throw batteries into fire. Explosion hazard.
Operation
Key A: Alarm function (hours, minutes, AM/PM)
Key B: Mode for setting stop watch function, alarm time,
time
Key C: Calendar setting (months, date, weekday)
Time mode
Keep pressing the mode key B until you reach the time mode. You recognize the time mode by the display of the
weekday, the hours, the minutes and the seconds.
In order to set the time press the mode key B three times. Now the seconds display starts blinking.
Use the C key to change the values upwards step by step (set the seconds back to 00).
Use the A key to switch to other settings in the following order: seconds _ minutes _ hours _ day _ month _
weekday.
If you keep pressing the C key when setting the hours, you change to the 12-hour-mode and by continuously
pressing you return to the 24-hour-mode.
In order to complete the time setting press the mode key B once.
You can read the date by pressing the key C in the time mode and the set alarm time by pressing the key A.
Alarm time
You set the alarm time by pressing the key A and by continuously pressing it in the time mode. If you keep
pressing the A key you can turn on or off the alarm by pressing the C key. If the alarm is set, a bell symbol
appears in the display.
If you want to turn on the hour signal keep pressing the A key and press the mode key B. If the hour signal is
turned on the weekday bar appears in the display.
In order to set the alarm time press the mode key B twice in the alarm mode. The minutes of the alarm time start
blinking.
You can set the minutes with the C key. The hours blink when you press the A key and can also be set by the C
key. If you set the alarm time the alarm is activated automatically (a bell symbol appears in the display). If the
alarm sounds it can be turned off by pressing the key A or C.
The alarm sounds in intervals of 5 minutes until the bell symbol is turned off as described above.
Stop watch function
You reach the stop watch function by pressing the mode key B in the time mode.
If you press the C key the stop watch starts. The display shows the 1/100 seconds, 1/10 sconds, seconds and the
minutes.
By pressing the C key again you stop the stop watch and can read the result. If you press the A key the stop
watch is set back to zero.
If you want to measure the times of e.g. two runs you can store a time interval. In order to do so, start the stop
watch with the C key. If, e.g., the first runner has reached the finish, you press the A key and the C key for the
second runner. You see the time of the first runner on the display and by pressing the A key the time of the
second runner. You delete all values by pressing the A key again.
Publicité
