Télécharger Imprimer la page

Conrad CG-501 Mode D'emploi page 4

Publicité

Les langues disponibles

Les langues disponibles

Stop watch CG-501 b/n 84 08 73
These operating instructions are part of this product. They contain important notes on the
startup procedure and operation. Please observe this, also when handing this product to third
parties. Please keep these instructions for looking up!
Dear customer,
Thank you very much for buying the stop watch.
This product fulfils the requirements of any applicable European and national regulations. Conformity has been
proven, the corresponding statements and documents are deposited with the manufacturer. In order to keep this
condition and ensure safe operation, these operating instructions must be observed by the user!
If you should have any questions please contact our technical support.
Phone: 0180 – 5 31 21 17; Monday – Friday: 8.00 to 18.00 hrs
Intended use
You can meter times up to 24 hours with this stop watch. The first 30 minutes precise to the 1/100 second, then it
is measured in hours and seconds. A clock and an alarm clock are also built in.
Any other use than described above is not allowed and may result in serious hazards of the product. It may also
result in serious hazards, such as short-circuiting, fire, electrical shock, etc. The entire product must not be
modified or converted in any manner whatsoever! It is absolutely necessary to follow the safety instructions.
Safety instructions
We assume no liability in the event of personal injury or property damage caused by the
improper operation and handling of the product or by the failure to observe the safety
information! Any warranty claim shall be void under those circumstances.
For safety and technical approval reasons (CE), the unauthorized conversion and/or modification of the work lamp
is not permitted.
The device must only be operated with a round cell LR44. Never try to operate the device on any other voltage or
any other types of batteries!
Avoid heavy duty of the devices.
Do not expose the device to high temperatures, heavy vibrations or high humidity.
Do not switch on the device immediately after having taken it from a cold into a warm room. The
condensation water being produced then may destroy the devices. Let the devices cool down to room
temperature in an off-state. Wait until the condensation water has been evaporated.
Do not leave the wrapping materials lying around; plastic foils and plastic bags could become toys that are
dangerous to children.
Do not use the device for industrial purposes.
If you should not be aware of the correct connection or if questions arise which are not clarified
within the course of the operating instructions, please contact our technical hot-line or another
expert.
Product description
You can meter times up to 24 hours with this stop watch. The first 30 minutes precise to the 1/100 second, then it
is measured in hours and seconds. A clock with calendar and an alarm clock are also built in. You have the option
to have the time displayed in 12- or 24-hour-format. Besides the normal alarm function you can also set an hour
signal. The stop watch is operated by a round cell of LR44 type.
OPERATING INSTRUCTIONS
CE

Publicité

loading

Ce manuel est également adapté pour:

84 05 73