Table des Matières
Publicité
WHAT TO DO IF...
PROBLEMS
CAUSES
None of the lights are
- Power supply problem
lit.
- Other
The iron does not heat
- Appliance not plugged in or On/Off button not
up.
pressed
- Other
No steam is produced.
- The reservoir is empty
- The reservoir is incorrectly inserted or has not been
inserted.
- The anti-scale cartridge has not been inserted
- The anti-scale cartridge is incorrectly inserted in the
reservoir
- The cartridge lifetime pilot light is on
- Other
The machine makes a
- There is no water in the reservoir
noise.
- The reservoir is incorrectly inserted or has not been
inserted.
- Other
The supply of steam is
- Long periods of steaming
interrupted
MAINTENANCE
• To clean the body of the appliance, simply use a moist cloth. Do not use solvents
or detergents which may harm the body material.
SOLUTIONS
- Check the plugs and mains
- Go to your local dealer
- Plug in the appliance and press the On/Off button.
- Go to your local dealer
- Press the steam button or the steam trigger on the pistol handle
- Fill the reservoir
- Insert the reservoir and replace the tank cap
- Insert an anti-scale cartridge into the reservoir
- Insert the anti-scale cartridge correctly and replace the tank
cap
- Change the anti-scale cartridge. Press the steam button
- Go to your local approved service dealer
- Fill the reservoir
- Insert the reservoir and replace the tank cap
- Go to your local approved service dealer
- Wait until the indicator light illuminates again before requesting
steam.
- 22 -
Publicité
Table des Matières
