Setting The Temperature - LG SIGNATURE LSR100 Manuel Du Propriétaire

Notes for Use the Control Panel
• The control panel will turn on in any of the
following cases.
− When the power is turned on
− When a button is pressed
− When the appliance door (fridge
compartment, freezer compartment, door in
door) is opened
• The control panel will turn off automatically for
energy saving in any of the following cases.
− When one minute has passed after turning on
the power
− When no button operation is carried out for
20 seconds after a desired button is pressed
− When 20 seconds has passed after the
appliance door (fridge compartment, freezer
compartment, door in door) is opened and
closed
• If there is any finger or skin contact to the
control panel while cleaning it, the button
function may operate.

Setting the Temperature

This sets the fridge temperature or freezer
temperature.
• Press the Fridge button or Freezer button to
adjust the temperature.
• The initial temperature is set.
− Fridge : 3 °C
− Freezer : -18 °C
• The temperature can be adjusted.
− Fridge : from 0 °C to 7 °C
− Freezer : from -24 °C to -16 °C
• The actual inner temperature varies depending
on the food status, as the indicated setting
temperature is a target temperature, not actual
temperature within the appliance.
28
NOTE
• The default temperature setting may vary
depending on the appliance.
• Wait until two or three hours have passed after
connecting the appliance to the outlet before
storing food in the appliance.
• The appliance can automatically detect
problems during the operation.
• If a problem is detected, the appliance does
not operate and an error code is displayed
even when any button is pressed.
• When this occurs, do not turn off the power
and immediately contact an LG Electronics
customer information centre. If you turn off
the power, the repair technician from the LG
Electronics customer information centre. It may
have difficulty finding the problem.
Setting the Fresh Keeper
You can minimize the spoiling of food from
temperature changes by maintaining the
refrigerator's temperature at 2 °C.
Press the Fridge Temperature button for 3
seconds and the Fresh Keeper will icon appear
in the control panel. Then the Fresh Keeper can
be configured.
• To turn off the Fresh Keeper, press the Fridge
Temperature button once while the fridge
temperature is displayed on the control panel
or hold the Fridge Temperature button for 3
seconds when the fridge temperature is not
displayed.
EN