The Camera Control Panel - Optika Italy H Serie Manuel D'instructions

6.1

The Camera Control Panel

The Camera Control Panel controls the camera to achieve the best image quality according to the specific ap-
plications. It will pop up automatically when mouse cursor is moved to the left side of the video window (in meas-
urement status, the Camera Control Panel will not pop up. Only when measurement process is terminated will
the Camera Control Panel pop up by moving mouse cursor to the left side of the video window).
Left-clicking button
Control Panel
to achieve Display/ Auto Hide switch of the Camera Control Panel.
Function
Snap
Record
Auto Exposure
Exposure
Compensation
Exposure Time
Gain
Red
Green
Blue
Auto White
Balance
Manual White
Balance
Sharpness
Denoise
Saturation
Gamma
Contrast
DC
AC(50HZ)
AC(60HZ)
Default
Capture image from the current video window
Record video from the current video window
When Auto Exposure is checked, the system will automatically adjust ex-
posure time according to the value of exposure compensation
Available when Auto Exposure is checked. Slide to left or right to ad-
just Exposure Compensation according to the current video brightness to
achieve proper brightness value
Available when Auto Exposure is unchecked. Slide to left or right to re-
duce or increase exposure time, adjusting brightness of the video
Adjust Gain to reduce or increase brightness of video. The Noise will be
reduced or increased accordingly
Slide to left or right to decrease or increase the proportion of Red in RGB
on video
Slide to left or right to decrease or increase the proportion of Green in
RGB on video
Slide to left or right to decrease or increase the proportion of Blue in RGB
on the video
White Balance adjustment according to the window video every time the
button is clicked
Slide the Red or Blue to manually set the video White Balance
Adjust Sharpness level of the video window
Slide left or right to denoise the image
Adjust Saturation level of the video window
Adjust Gamma level of the video. Slide to the right side to increase gam-
ma and to the left to decrease gamma
Adjust Contrast level of the video. Slide to the right side to increase con-
trast and to the left to decrease contrast
For DC illumination, there will be no fluctuation in light source so no need
for compensating light flickering
Check AC(50HZ) to eliminate flickering "strap" caused by 50Hz illumina-
tion
Check AC(60HZ) to eliminate flickering "strap" caused by 60Hz illumina-
tion
Restore all the settings in the Camera Control Panel to default values
Page 13
Description