Default Settings; Internet Explorer Configuration - Atlantis Land WebShare RB WN Mode D'emploi

6. DEFAULT SETTINGS

The Wireless Broadband Router can be configured with your Web browser. The
web browser is included as a standard application in following operation systems,
UNIX, Linux, Mac OS, Windows XP2000/Vista/7, etc. The product provides a very
easy and user-friendly interface for configuration.
Before Configuration
This section describes the configuration required by LAN-attached PCs that
communicate with the Wireless Broadband Router, either to configure the device, or
for network access. These PCs must have an Ethernet interface installed properly,
be connected to the Wireless Broadband Router either directly or through an
external Switch, and have TCP/IP installed and configured to obtain an IP address
through a DHCP server or a fixed IP address that must be in the same subnet of the
Wireless Broadband Router. The default IP address of the Wireless Broadband
Router is 192.168.1.253 and subnet mask is 255.255.255.0. The best and easy
way is to configure the PC to get an IP address from the Wireless Broadband Router
(DHCP client).
Please follow the steps below for PC's network environment installation. First of all,
please check your PC's network components. The TCP/IP protocol stack and
Ethernet network adapter must be installed. If not, please refer to MS Windows
relative manuals.
 Username:admin
 Password: atlantis
 IP LAN address: (192.168.1.253), Subnet Mask (255.255.255.0)
 IP WAN adress: client DHCP
 DHCP Server: enalble (192.168.1.100-192.168.1.199)
 SSSID= A02-RB2-WN, A02-RB1-W300N, A02-RB-W300N
 Channel=6,
Encryption Key: WebShareRBWN

7. INTERNET EXPLORER CONFIGURATION

Now open IE, go to Instruments menu, select the Connections tab and select
one of the following options:
 Never use remote connection
 Use remote connection if another network connection isn't available
Authentication:
36
WPA2PSK, Encrypton: TKIP/AES,