Remote Control; First Steps; Network Requirements; Preparing The Network - Albrecht DR 460 C Mode D'emploi

2.3. Remote control

On/Off
Favourites
▲
Navigation up
◄
Navigation left
OK
Enter
►
Navigation right
▼
Navigation down
MODE
MODE
HOME
Alarm
-
Volume +
Mute
+
Volume +
0-9
Station memory 0-9 Recall saved stations
Sleep timer
Dimmer
To open the battery compartment of the remote control, push the battery compartment open with
your thumb. Insert AAA batteries, the polarity is indicated in the battery compartment.
Please dispose of used batteries in an environmentally friendly way.

3. First steps

3.1. Network requirements

Before using the DR 460 C, the following requirements must be met:
● Broadband connection with a wireless access point, router or similar network device.
● The network device must support WLAN (802.11b/g/n) wireless connection.
● If you want to remotely control the DR 460 C via DLNA, you will need a PC or smartphone
connected to the same network as the DR 460 C.

3.2. Preparing the network

• Establish a WLAN connection as follows:
• Make sure that the WLAN indicator on the wireless access point or router is lit.
Please refer to the corresponding user manual for further information.
28
Switch device on and off (standby)
Show favourites list
Long press: Save favourites
Scroll up through menu
Enter text
Return to the previous menu
Confi rm selection of a menu option
Confi rm selection of option and view
submenu
Scroll down through menu
Enter text
Switch between the modes.
Function changeable in the "Button" menu
View the main menu
View the alarm menu
Decrease the volume
Mute the sound
Increase the volume
Select automatic switch-off time
Long press: Sleep radio menu
Dim the backlight
English