Berger & Schroter 31884 Instructions D'utilisation page 16

Install Steps
• Mark the drill holes by holding the foot of the wall bracket at the de-
sired mounting location and marking the hole positions.
• Use a drill with a 6 mm drill bit to drill the required holes and insert the
plugs and insert the wall plugs flush with the wall.
• Screw the wall bracket to the wall using the supplied screws .
• Mount the solar panel on the tripod screw and screw the solar panel
a little way on (about three turns).
• Turn the solar panel in the desired direction and lock it with the lock
nut.
• To move the solar panel into its final position, undo the two pivot bolts
a little, position the solar panel and fix the position by tightening the two
pivot bolts.
16