Télécharger Imprimer la page

Berger & Schroter 31884 Instructions D'utilisation page 12

Publicité

Les langues disponibles

Les langues disponibles

Operation Introduction
Installing
You can fix the solar panel to a tree by the bandage. Or fix it to flat sur-
faces by bracket.
1.You should mount the solar panel via bandage or bracket in advance.
2.The solar panel should be placed in where has enough sunlight, no
barrier and shelter. And the energy absorption glass has to face to the
sunlight.
3.Place the solar panel in where above the ground or platform to avoid
being inundated by rain.
4.Adjust the angle between the solar panel glass and horizontal plane,
suggest to keep an angle of 30-45 degree. If the angle is too small, the
panel glass will be easy to water or fall foreign matter. If the angle is too
big, sunlight will be not enough.
5.Check and make sure the solar panel is fixed well.
Connection
We supply two cables as below.
Cable A: Used for charging the solar panel by power adapter in 5V.
Square side connect to the adapter and round side connect to the 5V
IN interface on the solar panel.
Cable B: Used for powering the hunting camera by solar panel.Smaller
side connect to the DC socket of hunting camera. Bigger side connect
to the 6V OUT interface on the solar panel.
Cabel B
Cabel A
12

Publicité

loading