Samsung NX60 85 Serie Mode D'emploi page 42

Maintenance
about 5°
Fig. 1
Fig. 2
42 English
NX9000T_NX60T8511SS_AA_DG68-01221A-00_EN.indd 42
3. Firmly grasp both sides of the door at
the top.
4. Close the door to the door removal
position, which is approximately
5 degrees from vertical (Fig. 1).
5. Lift the door up and out until the hinge
arms are clear of the slots (Fig. 2).
How to reinstall the door
1. Firmly grasp both sides of the door at the top.
2. With the door at the same angle as the removal position, slide the indentations
of the hinge arms into the bottom edges of the hinge slots. The notches in each
hinge arm must be fully inserted into the bottoms of each slot.
Bottom edge of slot
Hinge arm
Indentation
3. Open the door fully. If the door will not open fully, the indentations are not
inserted correctly in the bottom edges of each slot.
4. Push the hinge locks up against the front frame of the oven cavity into the
locked position.
Locked position
5. Close the oven door.
Hinge lock
Unlocked position
2020-03-25 6:12:06