Setting The Clock; Setting The Kitchen Timer - Samsung NE59J7850 Serie Mode D'emploi

Setting the clock

The clock must be set to the correct time of day for the automatic oven timing functions to
work properly.
• The time of day cannot be changed during a timed cooking, a delay-timed cooking, or a
self-cleaning cycle.
• You can choose between a 12-hour or 24-hour display. The default is 12-hour.
How to set the clock
1. Start the setup.
Press Clock.
2. Enter the current time in hours and
minutes on the number pad, eg. 1, 3, 0,
for 1:30.
3. Press Clock or START/SET to save the
changes.

Setting the kitchen timer

The kitchen timer serves as an extra timer that will beep when the set time has elapsed. It
does not start or stop cooking functions. You can use the kitchen timer with any of the other
oven functions.
How to set the timer
1. Turn the timer on.
Press Timer 1 On/Off (Timer 2 On/Off).
2. Enter the amount of time you want.
Enter the amount of time you want using
the number pad, eg. 1, 5. The timer can be
set for any amount of time from 1 minute
to 9 hours and 99 minutes. If you make
a mistake, press Timer 1 On/Off (Timer
2 On/Off) and enter the amount of time
again.
NE59J7850WS_AA_DG68-00600A-01_EN.indd 37
How to change between a 12-hour
and 24-hour display
1. Press Broil and 4 on the number pad at
the same time for 3 seconds.
The display will show the present mode
(eg. 12 hour).
2. Select the display mode you want.
Press 0 on the number pad to select
12 hour or 24 hour.
3. Press START/SET to save changes.
3. Start the timer.
Press Timer 1 On/Off (Timer 2 On/Off) or
START/SET.
4. When the set time has elapsed, the oven
will beep and the display will show End
until you press the pad. You can cancel
the timer at any time by pressing Timer 1
On/Off (Timer 2 On/Off) or START/SET.
English 37
2015-04-23 10:32:02