Setting System Mode; Preset Energy-Saving Schedules - Honeywell Home Smart Serie Mode D'emploi

Setting system mode

1 Touch MODE to display system settings.
2 Touch desired option:
Heat: Thermostat controls only the heating
system.
Cool: Thermostat controls only the cooling
system.
Off: Heating/cooling systems are off.
Automatic: Thermostat selects heating or
cooling as needed depending on the indoor
temperature.
Emergency Heat (heat pumps with aux. heat): Controls auxiliary/
emergency heat. Compressor is locked out.
3 Touch Done to save and exit.
Note: The Automatic and Emergency Heat system settings may not
appear, depending on how your thermostat was installed. See "Auto
changeover" on page 26.

Preset energy-saving schedules

This thermostat uses default Energy Saver settings that can reduce your heating/
cooling expenses. To customize settings, see next page.
Period
Wake
Leave
Return
Sleep
Period
Occupied 1
Unoccupied 1
Occupied 2*
Unoccupied 2*
* Period 2 is cancelled by default. If you activate it, the values shown above are
default settings.
69-2715EF—07
Heat
Start time
(Mon-Fri)
6:00 am
8:00 am
6:00 pm
10:00 pm
Start time
8:00 am
10:00 pm
12:00 am
12:00 am
Done
Cool
(Mon-Fri)
70° 78°
62° 85°
70° 78°
62° 82°
Heat
70°
55°
70°
55°
16
MODE
Heat Cool
(Sat-Sun) (Sat-Sun)
70° 78°
62° 85°
70° 78°
62° 82°
Cool Fan
75° On
85° Auto
75° On
85° Auto