Hama 00053327 Mode D'emploi page 5

g Operating Instruction
Package contents
• USB 2.0 & FireWire ExpressCard
• These printed installation instructions
• Magix Video Deluxe SE CD-ROM
Important instructions regarding the power supply
Connecting an external power supply unit allows you to
supply power to connected FireWire devices only.This
means that devices without their own power supply can
also be operated using the ExpressCard.
Note:
Use only switching power supply units with the following
specifications (we recommend Hama item no. 46611):
• Voltage DC 12 V, capacity depends on the connected
device
• Polarity: outer negative (-) and inner positive (+)
Caution: Failure to observe this warning may cause damage
to the laptop, ExpressCard or the connected device. Hama
GmbH & Co KG accepts no liability for damage that arises
from a failure to observe these instructions.
Software installation
Installation on Windows 7 (32-bit and 64-bit editions)
You do not need to install any additional drivers because
Windows 7 already includes them.
Carefully insert the ExpressCard into the ExpressCard slot
and then start up Windows 7. After you have started the
operating system, the computer automatically detects and
installs the ExpressCard after a short time.
You can check whether the ExpressCard was installed
properly under Start (Windows logo)-> Control Panel ->
Hardware and Sound -> System -> Device Manager. The
following entries must appear without yellow exclamation
marks.
IEEE 1394 bus host controllers
• Texas Instruments OHCI-compliant IEEE 1394
host controller
USB controllers
• Standard USB hub
Installation on Windows Vista (32-bit and 64-bit editions)
with Service Pack 2
You do not need to install any additional drivers, because
Windows Vista already includes them.
4
Carefully insert the ExpressCard into the ExpressCard slot
and then start up Windows Vista. After you have started the
operating system, the computer automatically detects and
installs the ExpressCard after a short time.
You can verify whether the ExpressCard has been
successfully installed by checking under Start (Windows
Logo) -> Control Panel -> System and Maintenance
-> Device Manager. Under some circumstances, User
Access Control may ask you to approve this action. Click
Continue. The following entries must appear without yellow
exclamation marks
IEEE 1394 bus host controllers
• Texas Instruments OHCI-compliant IEEE 1394 host
controller
USB controllers
• Standard USB hub
Note: We highly recommend that Windows Vista users
install Service Pack 2 due to enhancements and improved
functionality.
Installation on Windows XP with Service Pack 3
Preparation: Ensure that your Windows XP user account
has administrator privileges, otherwise the driver
installation will not be successful.
You do not need to install any additional drivers, because
Windows XP already includes them.
Carefully insert the ExpressCard into the ExpressCard slot
and then start up Windows XP. After you have started the
operating system, the computer automatically detects and
installs the ExpressCard after a short time.
You can check whether the ExpressCard was installed
properly under Start -> Control Panel -> Performance
and Maintenance -> System -> Hardware -> Device
Manager.The following should now appear without yellow
exclamation marks.
USB controllers
• Standard extended PCI-to-USB universal host controller
IEEE 1394 bus host controllers
• Texas Instruments OHCI-compliant IEEE 1394 host
controller