Gear4 HouseParty Portable Wireless PG532 Notice D'utilisation page 7

For use with iPod / iPhone /
iPad:
■ Carefully insert your iPod / iPhone / iPad into
the dock.
■ Press play on your iPod / iPhone / iPad and
control the music using your device.
■ To enable wireless control, undock your
paired iPod touch / iPhone / iPad from the
speaker and control your speaker wirelessly
through the SmartLink Wireless app.
To change to AUX mode:
■ Press and hold the power button until an
audio tone is heard (about 6 seconds). This
indicates that the mode change is successful.
■ To return to iPod mode from AUX mode,
press and hold the power button for 6
seconds or turn the speaker off and on.
For use with other audio
devices:
■ Make sure that the speaker is in AUX mode.
Please see above to change modes.
■ Plug one end of a 3.5mm audio cable (not
included) into your MP3 or MP4 player and
connect the other end into the AUX line-in
port at the back of the unit.
4 GEAR4 / HouseParty Portable Wireless / User Manual
Deep Sleep Mode:
■ The speaker will automatically enter Deep
Sleep Mode after 30mins in Standby,
to save battery.
■ To exit Deep Sleep Mode, press the
power button.
Register your HouseParty Portable Wireless
to activate your warranty and receive product
updates at www.gear4.com/register
Please ensure that your iPod / iPhone / iPad
is using the latest software version. To update
the software, connect your iPod / iPhone / iPad
to iTunes. If there is a newer software version
available you will be prompted to upgrade.
Copyright © 2012 Disruptive Limited. All rights
reserved. Reproduction in part or in whole is
prohibited. GEAR4, SmartLink and HouseParty
are trade marks of Disruptive Limited. iPad,
iPhone, iPod and iPod touch are trade marks
of Apple Inc., registered in the U.S. and other
countries. App Store is a service mark of
Apple Inc.
"Made for iPod", "Made for iPhone" and "Made
for iPad" mean that an electronic accessory
has been designed to connect specifically
to iPod, iPhone or iPad respectively and has
been certified by the developer to meet Apple
performance standards.
Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards.